Hi

Wanted to look for an alternative to replace my existing video splitter due to some limitations on its features.

If you're looking at this page, can you answer the following before I decide if it's worth my time to try this out, and do a comparison with my existing video splitter (and of course ultimately buy it as my existing one was a purchased software)? Thanks.

1) Any special discount code if I decide to buy (either now after trying or after 6 months)?

2) Can I do a frame cutting instead of a millisecond cutting (easier to go thru' 25 frames rather than 1000 parts per second to reach the precise point where the video or audio changes)?

3) Does it support projects and run these projects in a batch mode (i.e. save each cut/merge into individual projects and then run all the projects in a batch)?

Thanks

Ekin  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (-12)

Traducir

Ekin, I'm looking at this page and am wondering that if your time is that valuable why are you wasting it awaiting a reply from someone else to have done your testing for you? Maybe you are badly aiming your comment at the vendor of this giveaway in the blind hope they are reading these comments? If the latter you'd be better off emailing the vendor directly instead of posting a comment that the "You" is mostly giveawayoftheday.com visitors and not someone who cares one iota if you buy the giveaway or not!

Ekin, I'm looking at this page and am wondering that if your time is that valuable why are you wasting it awaiting a reply from someone else to have done your testing for you? Maybe you are badly aiming your comment at the vendor of this giveaway in the blind hope they are reading these comments? If the latter you'd be better off emailing the vendor directly instead of posting a comment that the "You" is mostly giveawayoftheday.com visitors and not someone who cares one iota if you buy the giveaway or not!
Save | Cancel

TK  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+25)

Traducir

it is not a video converter, it is a video cutter

wombat  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (-9)

Traducir

wombat, according to the developer, this paid-for version *does* incorporate a converter, whereas the always-free version does not:

https://www.tuneskit.com/free-video-cutter-for-win.html

As I cannot see any performance difference between the paid-for and the free version (other than conversion) then the point of this 6-month giveaway escapes me. Why not simply use the free version with any of the many free video converters out there?

(After the recent wrecking of comments by a down-vote bot, I hope GAOTD has now been able to fix things otherwise many are going to be discouraged from bothering.)

wombat, according to the developer, this paid-for version *does* incorporate a converter, whereas the always-free version does not: https://www.tuneskit.com/free-video-cutter-for-win.html As I cannot see any performance difference between the paid-for and the free version (other than conversion) then the point of this 6-month giveaway escapes me. Why not simply use the free version with any of the many free video converters out there? (After the recent wrecking of comments by a down-vote bot, I hope GAOTD has now been able to fix things otherwise many are going to be discouraged from bothering.)
Save | Cancel

Phil  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+17)

Traducir

Downloaded and installed . Looks really nice and simple to use.
Edited my first video then clicked on "start" to save it. Get error message "invalid output folder" , so , it wont convert.
Have searched internet for a solution on setting the output folder and looked everywhere within the interface to find where to do this , bit , I cannot find it. Help ?

Cymro  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+5)

Traducir

Jean-Pierre (FR), Thank you . I found that and changed it to another directory which exists. However , when i now hit the "start" botton , to convert the video to mp4 , NOTHING happens. It does not work

Jean-Pierre (FR), Thank you . I found that and changed it to another directory which exists. However , when i now hit the "start" botton , to convert the video to mp4 , NOTHING happens. It does not work
Save | Cancel

Cymro  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+12)

Traducir

Cymro,

Go the the small Menu and open it. Then click on "Preferences" and tab "Convert".
Here you can insert your choice.

Enjoy

Cymro, Go the the small Menu and open it. Then click on "Preferences" and tab "Convert". Here you can insert your choice. Enjoy
Save | Cancel

Jean-Pierre (FR)  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+10)

Traducir

I have loaded and registered the software but when I open video files (mkv and mp4 so far) the playback window shows the video truncated and two copies side by side!!

BHT  –  4 years ago  –  ¿Te ha parecido útil este comentario? si | no (+6)

Traducir